L Series — Linear Diffuser for Ceiling, Sidewall or Floor Applications
How to Specify
L Series — Linear Diffuser for Ceiling, Sidewall or Floor Applications
Assets/Details
Engineering Data (292 KB, PDF)
Submittal Data - LS Series - Mounting Style 2 (72 KB, PDF)
Submittal Data — LF Series - Mounting Style 0 (64 KB, PDF)
Submittal Data — LS Series - Mounting Style 0 (69 KB, PDF)
Submittal Data — LS Series - Mounting Style 1 (77 KB, PDF)
Submittal Data — LS Series - Mounting Style 3 (77 KB, PDF)
Submittal Data — LF Series - Mounting Style GO (58 KB, PDF)
Submittal Data — LS Series - Mounting Style 00 (61 KB, PDF)
Submittal Data — L Series - Mitered Corners (79 KB, PDF)
Submittal Data — L Series - Dampers and Grids (59 KB, PDF)
- Extruded aluminum construction
- Ceiling, sidewall, sill or floor applications
- Available in 0, 15, or 30 degrees and pencil proof bar deflections
- Maximum one-piece length 72", width 24" (1/2" width increments)
- Lengths over 72" made in multiple units with keyway splices to form even continuous lengths
- Bright White or Satin Anodized Finish
Note: Floor application must be ordered as "LF". Eight-inch maximum width for constant traffic; 12" maximum width for occasional traffic; maximum length 72'.
Refer to the Submittal Drawings for dimensions and additional details
L Series Bar Styles
Bars on 1/2 centers
Note: Quantity of bars = (2 x listed width) - 2.
Example: 4" listed with = 6 bars = (4 x 2) - 2
Options
Mitered Corners
Miltered Corner Sections Furnished as shown.
Blank off baffles avialable upon request.
Single-Leaf Damper Option
- Alumnium construction
- Leaf type for sizes 1 1/2" to 3"
- Cannot be used with hanger brackets
Note: Order with desired diffuser for attachment at factory.
Grid
- Alumnium construction
- Individual adjustable blades
- Cannot be used with hanger brackets
Note: G Grid blades are assembled parallel to short dimension. Order with desired diffuser for factory fitting.
Damper
- Extruded aluminum construction
- Controls the air volume from full flow to shut-off
- Fits widths of 3-1/2" and wider
- Must be ordered seperately and ductmount if mounting style #1 is used.
Note: Order with desired diffuser for attachment at factory
