S Series — Slot Diffuser for Ceiling or Sidewall Applications
S Series — Slot Diffuser for Ceiling or Sidewall Applications
Assets/Details
Engineering Data — S Series (3 MB, PDF)
Submittal Data — B0 (163 KB, PDF)
Submittal Data — E1 (97 KB, PDF)
Submittal Data — E2 (95 KB, PDF)
Submittal Data — E0/F0 (108 KB, PDF)
Submittal Data — Mitered Corners (92 KB, PDF)
- Extruded aluminum construction
- Three slot types: 50 (1/2" slot), 75 (3/4" slot), 10 (1" slot)
- One to eight slots wide for air volume of 10-350 cfm per foot
- Adjustable pattern controller
- Minimum one - Piece Length: 12"
- Maximum one-piece length 72", lengths over 72' made in multiple units with pin splices for even continuous lengths (1/8" increments). 999" maximum continuous length.
Note: The width dimension is determined by the slot width (type) and the number of slots.
Mounting Styles
B0 – T-Bar Lay-in - Diffuser Only
Duct Width: A + 1/16
Overall Width: A + 7/8
Please see Submittal Drawing for details
T-Bar Application
Order the length shown below
| 2'x2' | 2'x4' | |
|---|---|---|
| with End Caps | 23 3/4" | 47 3/4". |
E0 – Diffuser Only
Duct Width: A + 7/16
Overall Width: A + 7/8
Please see Submittal Drawing for details
F0 - Screw Holes in Margin
Duct Width: A + 7/16
Overall Width: A + 7/8
Please see
Submittal Drawing (108 KB PDF) for details
Duct Width: A + 7/16
Overall Width: A + 7/8
Mitered Corners
- 90-degree mitered corners are available as factory-fabricated section. Precise factory cutting and assembly reduces field fabrication time and assures proper fit. Corner sections are furnished and blanked off. Corner sections butt to adjacent straight sections, which are spliced together with aligning keys.
- Mitered corners are furnished in Mouting Style E2. When viewed from the room side, the mitered corner section appears identical to the butting straight sections.
- Plaster frame mitered corners can be specified with the outlet mitered corner.
NOTE: DRAWING REQUIRED when ordering linear or slot diffusers with mitered corners.
How to Order
S [1] [2] [3] [4] [5] [6] [7]
[1] Type:
-
50 - 1/2" slot
-
75 - 3/4" slot
-
10 - 1" slot
[2] Number of Slots:
-
01-08 slots available
-
Note: Use a two-digit number to specify;
-
Example: for two slots, specify "02"
[3] Mounting Style:
- B0 - T-Bar Lay-in - Diffuser Only
- E0 - Diffuser Only
- E1 - Hanger Bracket
- E2 - Standard Mounting Frame
- F0 - Screw Holes into Margin
[4] Miter Type:
-
C - Ceiling
-
SI - Sidewall Inside
-
S0 - Sidewall Outside
[5] MC
[6] 90
[7] Finish
-
SA - Satin Anodized
-
W - White
Options
